The Truth About Exposed Fastener Metal Roofing

Many people—contractors and homeowners alike—refer to these products as “standing seam” roofing, when in fact, they are not true standing seam metal roofing systems. A true, high quality standing seam system will not have exposed fasteners and the individual panels will join together by some variation of an interlocking seam. Exposed fastener panels only overlap from one panel to the next. Also, true standing seam is manufactured in custom continuous length panels to avoid horizontal seams along the roof. Exposed fastener panels are often in standard lengths, resulting in horizontal overlaps as panels are stacked vertically up the roof.

Exposed fastener systems have been very popular in the agricultural market, used on barn roofs, chicken coops, and outbuildings. Many of these products do not require solid roof decking and can instead be installed over battens or strapping. These products are readily available around the country and, with the rapid growth of residential metal roofing, have been installed on many homes. The installation is quick and easy in most cases.

Most homeowners invest in a metal roof expecting to enjoy all of its benefits—energy efficiency, maintenance free, increased home value, and long life expectancy. In most cases, though, exposed fastener metal roofing does not provide these same benefits.

Exposed fastener products were designed with the price conscious farmer, looking for a cheap and practical roof for his barn, in mind. For this reason, they are often made from lower grade raw materials than those that are used in metal roof systems designed for residential use. They are often G60 galvanized rather than G90, AZ45 instead of AZ55, and polyester paint as opposed to Kynar 500. All of these compromises in the quality of materials make these products 20-25 year solutions while most homeowners expect a new metal roof to last 50+ years.

And then there are all of the fastener holes. An exposed fastener system on an average sized roof will result in hundreds, if not thousands, of screws drilled through the face of the panels. These screws have rubber washers or grommets initially but those soon dry out and crack. Additionally, the screws do not allow for the metal’s expansion and contraction and the fastener holes slowly “wallow out” over time. Water eventually penetrates these growing holes and significantly compromises the integrity of the roofing system. In order to prevent water from penetrating, the screws will need to be replaced every so often with screws of a larger diameter.

These products have significant shortcomings that can detract from the value of their home and not last much longer than traditional asphalt shingles. They are the perfect solution for barns, but exposed fastener metal roofing is oftentimes not what a homeowner is truly looking for.

Todd Miller- American Metal Roofs